Swan Jupiter CMM - Production Inspection
The Swan Jupiter is an advanced measuring CMM developed for high-speed flexible in-process gauging of vehicle bodies (BIW) and welded sub-assemblies. The Jupiter model provides a rugged, fast and reliable system designed to operate in the toughest of manufacturing environments and can be used for process control monitoring as well as individual part inspection. The Swan Jupiter inspection robot systems are designed to be stand-alone or integrated with the production line. Jupiter can be configured with the Renishaw PHS continuous wrist allowing unique dexterity for under-body measurements and can carry ultra long extensions allowing reach of the most difficult access points by performing 5 axis simultaneous motion. It can also be equipped with high-speed non-contact measuring sensors allowing inspection of features in dramatically shortened measuring cycle time compared with touch probing systems.
The modular architecture of the Swan Jupiter can allows integration into the production process and can be supplied as multi-arm solutions. Jupiter design is extremely stable, stiff and resistant to the harsh shop floor conditions. Maximum arm speed of 580mm/sec with acceleration rates of 1500 mm/s² allow Jupiter to be a most effective production inspection system.
Features & Benefits
Available a single or twin arm configuration
Separate granite or cast iron surface plate option
Steel X guideway with optimum measuring scale position for accuracy and maintenance
Rugged machine construction for reliable operation in manufacturing environments
0.1 micron resolution measuring scales incorporating dynamic signal processing
Dual precision Linear Guideways on X axis
Rigid air bearings to Y and Z axes with wide bearing spread ratios and low air consumption
Z axis counter-balance safety brake
Walk-on X axis steel covers for optimal operator access and safety
Thermal encapsulation of CMM with covers to minimize impact changing environment temperatures
Open access to CMM measuring area from all sides
Specifically designed for the shop floor environment
Suitable for floor-flush installation
Maximum Positioning Speed 580mm/sec
Maximum Acceleration 1500mm/sec²
Model Sizes
X axis strokes: 5000 | 6000 | 8000
Y axis strokes*: 1400 | 1600 | 1800
Z axis strokes: 2000 | 2500 | 3000)
*Per arm measuring stroke. Dual machine arms overlap by 100mm
MPEP from 14 microns
MPEE from 12 + 22L/1000 ≤ 50
Specifications
Environment
Nominal Temperature 20 °C
Allowable Temperature Range: 18 – 22 °C (Extended Range 16 – 26 °C)
Temperature Gradient: 0.5° C/hour – 2° C/day – 0.5° C/meter (Extended Range 5° C/day – 1.0° C/meter)
Operating Temperature Range: 15 – 35 °C
Relative Humidity 40 – 80% (non condensing)
Acceptable Vibrations: 30mm/ sec2 1-10Hz | 15mm/ sec² 10-20Hz | 50mm/ sec² 20-100Hz
Services
Minimum Air Supply 5.5 Bar -80PSI
Air Consumption 150Nl/min)
Power Supply Voltage 230v 50Hz or 110v 60Hz (+/- 2% single phase)
Maximum Power Consumption 10A 1400W
Performance Data
COORD3 CMM products are evaluated for accuracy using the ISO10360 standard.
